Mongolian mill, also known as Raymond mill, is a kind of more commonly used crushing and milling equipment. It has the advantages of strong complete set, convenient operation, high powder forming rate, and excellent fineness. It is deeply loved by users. With the development of various industries in the country, the gap in crushing and grinding equipment is getting bigger and bigger. Recently, a friend discovered during the use of Raymond mill equipment, what happened to the abnormal vibration of Raymond mill equipment during operation? Raymond machine manufacturers
As a kind of mechanical equipment, Raymond machine needs regular maintenance and overhaul and replacement of worn parts during long-term use. There are many possible reasons for the abnormal vibration of Raymond mill equipment during operation. Generally, experienced masters can tell where the equipment is faulty by just listening to it. If there is no vibration or loud noise in the feed, it is normal. This is the grinding roller and ring grinding in the grinding cavity. When the material enters the grinding cavity, the material is filled between the grinding roller and the grinding ring, and the sound will gradually become smaller. There is material between the grinding roller and the grinding ring as a buffer. The equipment gradually operates normally. During the grinding process, the blade will The material is scooped up, and then squeezed and ground by the grinding roller to achieve the purpose of powdering.
If the equipment still has vibration or noise problems after operation, we must first stop and check to see if the material is piled up and blocked. If too much material is fed and blocked, it will also cause the equipment to experience empty grinding, vibration and vibration. The problem of noise. The grinding roller and grinding ring are generally used for about 500 hours. According to the wear situation, the grinding roller and grinding ring of the equipment should be replaced in time. If the grinding roller and grinding ring are severely worn, there will be vibration and abnormal sound. Vibration and noise problems can be solved by replacing worn and wearing parts. One is the sudden nature, normal operation, large vibration occurs after the sudden feeding, this sudden vibration phenomenon, it is necessary to check whether the hardness of the material is too high. In the use of Raymond mill, abnormal conditions need to be stopped an examination. However, during the long-term use of the Raymond mill, the anchor bolts may become loose due to prolonged vibration, and irregular vibration occurs. We need to carefully judge the cause of the vibration before solving it.
The above is the problem of abnormal vibration during the operation of the Raymond mill equipment. I hope that it can be helpful to everyone when using the Raymond mill equipment.